QUEST VAPCO 540000001-20AR Purity Food Grade Lubricant, White Mineral Oil [12x20oz] 12 Per CS

BlastsAway Lint & Dirt from Coils

StripsOff Cooking Residue

No Water Required; DriesQuickly

Non-Conductive & Non-Flammable

For use in air conditioning maintenance, aircraft maintenance, industrial operations, food plants, refrigeration trucks, cold storage lockers, shipping operations, kitchensand indoor ice

rinks

A multi-purpose, high purity food grade lubricant that provides long lasting grease protection. Cured lubricant withstands heat to 550°F. Temperatures above 400°F may require periodic reapplication. NSF H-1 rated

Dry mist counteractant quickly freshens entire areas such as laundry hampers, garbage pails, auto interiors, offices, gym lockers, closets and many more. This specially formulated malodor counteractant eliminates the toughest odors such as tobacco smoke, vomit or urine odors that linger even after the source of malodor has been removed. The light formulation travels with airflow and eliminates the odors where they hang. Meets all current VOC standards. DIRECTIONS FOR USE: Shake well before using. Hold can at arm’s length and spray evenly throughout the room. 

Specially formulated to rapidly clean ovens, grills, cooking pots and pans, non-aluminum barbeque grills. Extra thick foam quickly penetrates grease, burned food, stains and grime. Stays in place on vertical surfaces to give thorough cleaning. Restores surface to like new condition without harming it. Simply spray on and wipe off. Use on warm or cold ovens. This formula has been authorized by the USDA for use in federally inspected meat and poultry plants.

DIRECTIONS FOR USE: Shake well. To remove child-proof cap, squeeze sides on ridges and pull off. Hold can 10 to 12 inches away from surface to be cleaned. With a slow sweeping motion, apply liberally. Completely cover surface with product. For warm ovens, allow to set for 5 to 10 minutes. Turn off current in electric oven and pilot lights in gas oven after warming. For cold ovens, allow to set for 10 to 20 minutes. Wipe clean with a paper towel, clean cloth or sponge. Be sure to wear gloves when using this product. Rinse with a potable water rinse after using to completely remove remaining cleaner. Repeat treatment for hard to clean or heavily caked areas. DO NOT USE ON ALUMINUM, PAINTED SURFACES, ASPHALT TILE OR LINOLEUM.

NU-VIEW is a powerful, non-toxic degreasing foam that clings to vertical surfaces, making clean up safe, effective and more efficient than conventional liquid cleaners and degreasers. Remains on surfaces until dirt and grease are wiped away. Removes cooking oils, grease, sugar, starch and protein residues, and baked on carbon. Eliminates oxidation odors. NSF Listed A1.

Cleans all types of food equipment, such as popcorn poppers, steamers, hot dog boilers, nacho chip warmers, stoves, slicing machines, and soft servers. Safe on plexiglass, formica, aluminum, stainless steel, painted metals and plastics, acrylics and chrome.

* Private Label Only: 2030 Nu-View Concession & Food Equipment Cleaner: 12- 20 oz. cans/ case, 18 oz net weight

6 - 20 oz cans /case, 18 oz net weight
H-1, F-1, R-1, P-B

GRAFFITI GONE contains blended solvents for removing most graffiti markings found in public places. Markings found on restroom walls, road signs, billboards, sidewalks, pavements, bridges, buses, trucks and buildings are easily removed. This product will not harm aluminum, steel, glass, concrete, porcelain, brass, chrome, marble, brick and most enameled surfaces. Be sure to pre-test in hidden areas for surfaces susceptible to solvent damage such as plastic, painted surfaces, rubber, asphalt tile and other synthetic surfaces. This formula is authorized by the USDA for use in federally inspected meat and poultry plants. DIRECTIONS FOR USE: Shake can well. Pretest on hidden area as indicated above. On smooth surfaces, spray directly on surface, allow solvent to react with markings and wipe away. On rough surfaces, spray directly on surface, use brush to remove markings and dry with cloth.

Dry mist counteractant quickly freshens entire areas such as laundry hampers, garbage pails, auto interiors, offices, gym lockers, closets and many more. This specially formulated malodor counteractant eliminates the toughest odors such as tobacco smoke, vomit or urine odors that linger even after the source of malodor has been removed. The light formulation travels with airflow and eliminates the odors where they hang. Meets all current VOC standards. DIRECTIONS FOR USE: Shake well before using. Hold can at arm’s length and spray evenly throughout the room.

SLIDE OUT Dry Silicone Spray Food Grade is designed to lubricate equipment used in the packaging and processing industry. Leaves a non-staining dry pure silicone film to lubricate moving parts, reducing friction and wear. Product is heat stable from -35°F to 350°F. Also formulated as a release agent on seals and gaskets of tank closures. Lubricates all sliding surfaces except those you wish to paint. Excellent on RV slide outs. Use on sticking metal, wood, rubber and plastic. Apply to cutting tables, conveyors, heat sealing equipment and slicing equipment. Waterproofs leather, canvas, rubber and chrome surfaces. Safe on all plastics. Complies with FDA regulations, CFR Title 21, paragraph 178.3570 when fully cured. Contains no methylene chloride. Won’t melt, freeze, gum or become rancid. DIRECTIONS: Read cautions and directions carefully before use. Area to be lubricated should be clean and dry. Shake well before use. Hold can 6-8 inches from surface. Spray in short bursts. Spray no more than required to lubricate surface. Do not spray electrical equipment while in use. Wait 5–10 minutes before operating electrical equipment after using. Spray is dry. Do not expect a liquid. Used as directed, it will not harm most surfaces.

CARBON-OFF!® is a powerful gel that dissolves carbon buildup from metal surfaces. Spray or brush on, let set 15 minutes to overnight, depending on the amount of buildup to be removed, then rinse under cold water with a brush or scrubbing pad. Also available in a dip tank solution for repeated treatment of multiple utensils. CARBON-OFF!® works quickly and easily saving time and labor. Do not use on (or place appliance to be cleaned on) painted surfaces, plastics, acrylics, corian sinks and counter tops, anolon surfaces, calphalon or tefl on nonstick pans. SAFE ON ALUMINUM. REMOVES BAKED ON CARBON FROM: Metal Surfaces • Brass • Stainless Steel • Broilers Waffl e Bakers • Chinese Woks • Popcorn Kettles Nickel Steel • Deep Fryers • Stove Parts Rotisseries • Barbecue Grills • Roasting & Sheet Pans • Pots & Pans HMIS Ratings, Aerosol: H-2, F-3, R-0, P-B. HMIS Ratings, Liquid: H-3, F-1, R-0, P-B. Available in: Pint, quart, and gallon cans, standard dip tanks and 20 oz. aerosol cans, 19 oz. net wt.

BRITE SHINE™ is a unique, mineral oil-based cleaning and polishing formulation in which every ingredient is of food grade or other high quality. It has less than 15% Volatile Organic Compounds (VOC’s).

Quickly cleans, restores and prolongs luster of metal surfaces. Easy to use. Contains no acids, alkalis, abrasives or heavy creams. Leaves behind a protective coating which resists finger marking and smudges. Contains no CFC's, chlorinated solvents, 1,1,1-Trichloroethane or Hexane.

Low-foaming, heavy-duty, concentrated fryer boil-out tablet

Improves oil life and food taste

Pre-measured tablets reduce foam and boil over to prevent messy cleanup

Excellent cleaning capacity for high soil, fat, and grease tolerance

Great for fryers and even pressure cookers

UPC Code:

661873401006

BARRICADE is a water-based, ready-to-use protective skin coating in convenient aerosol form. 

It protects exposed areas of skin from irritation when working with acids, alkalis, solvents, gasoline and other chemicals, and corrosive salts by forming a barrier to prevent grease, soil and ink from penetrating the skin’s pores and creases.

BARRICADE keeps skin cleaner, minimizing cleanup time. It is easy to apply and washes off with soap and water. Since it contains emollients and lubricants, it leaves skin soft after work is finished.

For use by silkscreen operators, printers, laboratory personnel, warehouse personnel, construction workers, landscapers and heavy machinery operators. Areas of use include printing plants, chemical plants, railroad yards, oil rigs, air and truck transportation terminals, industrial plants and shipyards. NOTE: CONTAINS SILICONE. USE CARE IN PAINT AND BODY SHOPS.

Concentrated and economical

Easy to apply and remove; no water, no mess

Leaves hands clean and soft

12 - 20 oz cans/case, 18 oz net weight

H-1, F-0, R-0, P-A