ROYAL SOVEREIGN Touchless Automatic Hand Dryer, Automatic, 110 V

Frost 1190 - Heavy Duty Hands Free Hand Dryer - Stainless Steel

Features: Touch free sensor is activated when hands are placed within the set range under spout. There is a .6 sec delay for on and a 2 second delay for off. The power will be cut off automatically in cases of irregular use over 120 seconds, sensor will reset during normal use. Sensor is 100% moisture proof.  Air volume: 345 m3/h (202 cfm), Wind velocity: 28 m/s (101 km/hr.)

Materials: Drawn 14 gauge steel, plated, brushed and lacquer finish.

Specifications: Approximately 20-25 second drying time.  Voltage: 120 volts, 220 volt (220 can be run on 208 volts, 50/60 hz).  Power consumption: 2,400 watts, Sound level: 70 db., 200 watt 5,500 rpm brush motor. Sensitive distance of sensor: 4-12” (10-30 cm).

Weight: 15 lbs. (6.8 kg.)

Dimensions: 8.5″D x 11″W x 9.75″H

Installation: Ensure when mounted that the dryer is 12″ (30 cm) above any fixed or movable objects. For unrestricted access ensure bottom of dryer does not exceed 48″ (120 cm) from floor. Mounting screws and hold location template provided.

Warranty: 5 years

FROST

Hand Free Hand Dryer, Automatic, 120 V

Power 60 Hz: 120 V/2200 W

Colour: White

Dimensions: 13" W x 7" D x 9" H

Material: Cast aluminum

Hand Dryer - Compact High Speed 120v Hands Free - Black

Frost 1198 – Compact High Speed Eco-Friendly Hand Dryer in Black Finish- 120V 

Site Location: These ADA compliant compact high speed hand dryers are ideal for renovations and areas with 15 amp. circuits available. They are also more environmentally friendly due to less energy consumption. The compact vertical design is perfect for areas where space is at a premium, such as restaurant washrooms.

Materials: Outer casing is 18 gauge drawn steel with black epoxy finish.

Power Usage: Whole unit is rated at 1000 watts. Heating element: 500 watts. Operating Voltage: 110-120 Vac, 50/60Hz, 0.84 – 1kw. Amps 8.4. Brush motor with dual ball bearing 500w, 29,000 R.P.M.

Electrical Safety: Motor thermal protection: contains an auto resetting thermostat which turns the unit off at 95° C (203° F). Heater thermal protection: auto resetting thermostat turns unit off at 85 degrees C (185 degrees F). Resets at 75 degrees C (167 degrees F). Thermal cut off at 142 degrees C (288 degrees F). Timing protection: 60 second auto shut off. Timing duration: 2 second delayed turn off.

Performance: Air speed output: 95-115 m/s (212-257 mi/hr). Volume: 80 m3/h, (47 cfm). Air output temperature: 55 degrees C (131 deg, F). Hands free sensor is infrared. Drying time: 10-15 seconds. Sound Level: 76.2 dB at 1 M. Sensor Range: 7” (18 cm).

Dimensions: 3.9″D x 6″W x 10.56″H

Warranty: 5 years

Frost 1190 - Heavy Duty Hands Free Hand Dryer - Stainless Steel

Features: Touch free sensor is activated when hands are placed within the set range under spout. There is a .6 sec delay for on and a 2 second delay for off. The power will be cut off automatically in cases of irregular use over 120 seconds, sensor will reset during normal use. Sensor is 100% moisture proof.  Air volume: 345 m3/h (202 cfm), Wind velocity: 28 m/s (101 km/hr.)

Materials: Drawn 14 gauge steel, plated, brushed and lacquer finish.

Specifications: Approximately 20-25 second drying time.  Voltage: 120 volts, 220 volt (220 can be run on 208 volts, 50/60 hz).  Power consumption: 2,400 watts, Sound level: 70 db., 200 watt 5,500 rpm brush motor. Sensitive distance of sensor: 4-12” (10-30 cm).

Weight: 15 lbs. (6.8 kg.)

Dimensions: 8.5″D x 11″W x 9.75″H

Installation: Ensure when mounted that the dryer is 12″ (30 cm) above any fixed or movable objects. For unrestricted access ensure bottom of dryer does not exceed 48″ (120 cm) from floor. Mounting screws and hold location template provided.

Warranty: 5 years