CONCROBIUM® 200620810 Tri-Jet Mold Control Fogger

A non corrosive, readily biodegradable solution that safely and effectively removes calcium, lime, rust and hard water stains with no toxic fumes. It is also septic safe. Ideal for porcelain, acrylic, fiberglass, stucco, brick, cement, glass, chrome and stainless steel. Rinse thoroughly with water after use.

CALCIUM, LIME & RUST REMOVER

Concrobium® Calcium, Lime & Rust Remover is a non-corrosive, readily biodegradable solution that safely and effectively removes calcium, lime, rust and hard water stains with no toxic fumes. It’s also septic safe.

RECOMMENDED USES

The solution is ideal for porcelain, acrylic, fiberglass, stucco, brick, cement, glass, chrome and stainless steel. Test on an inconspicuous section first. Note: May etch older surfaces. May return older cement to its original white appearance. Rinse thoroughly with water after use.

Do Not Use On: natural stone, marble, terrazzo, colored grout, painted/metallic glazed surfaces, plastic laminates, Formica®, aluminum, pewter, copper, brass, zinc, steam irons, refinished tubs or any damaged or cracked surfaces.

Concrobium Carpet Shampoo is an environmentally sustainable solution that deep cleans carpets and upholstery to leave them cleaner, fresher and brighter. Unlike other carpet shampoos, Concrobium Carpet Shampoo contains no soaping agents, so there’s no sticky residue left behind to cause resoiling and dulled appearance, and no need for anti-foaming additives.

ALL types of carpets and upholstery Including – rugs, floor mats, fabric drapes, fabric couches, throw rugs, fiber carpeting, stain resistant coatings, synthetic fibers and wool.

Download

Carpet Shampoo MSDS/SDS

Concrobium Mold Stain Remover. Eradicate mold staining with less labor. Concrobium Mold Stain Remover delivers exceptional mold stain removal with no brushing, sanding or blasting. That helps professional restoration contractors reduce labor costs and complete jobs more quickly. The unique solution can be applied with any standard sprayer, so mold stain removal projects can be completed without the capital equipment investments and operating expenses associated with dry ice and soda blasting techniques.

The proprietary solution employs liquid oxidative technology to facilitate physical mold removal, but it contains none of the harsh chemicals associated with traditional oxidation products. The 2013 Liquid Tri-Phasic Mold Stain Remediation study provides scientific proof that Concrobium Mold Stain Remover physically removes mold as well as, or better than traditional abrasive techniques, at a fraction of the labor investment.

Safe for use on most hard, non-porous or semi-porous surfaces such as wood and composite wood, concrete, masonry, drywall, grout, fiberglass, tile, plastic laminate and metal. The product is engineered to remove tough mold staining from building materials that cannot be removed from the contaminated environment. For ongoing protection apply Concrobium Mold Control after Mold Stain Remover application and HEPA vacuuming.

Consists of 2 parts (3.78L & 500mL)

Features

Removes mold staining and physically separates mold from the surface to facilitate full remediation

Ready to use immediately once parts 1 and 2 are combined

Superior mold stain removal efficacy

No harmful chemicals

No special equipment needed

Ingredients break down into safe, biodegradable by-products

Specifications

Coverage:  300 - 400 sq ft per set (depending on surface absorbency and extent of mold staining)

Form:  Liquid

Colour:  Clear

Odour:  Part 1 - light acetic acid, Part 2 - Odourless

pH:  Part 1 - 3.9 to 4.1, Part 2 - 12 to 13

Package size:  Part 1 - 3.78L, Part 2 - 500 ml

Ready to use:  No

Shelf life:  NA

Dilution:  Mix Part 1 and 2.

Recommended uses:  Can be used in homes, hospitals, institutions, schools, commercial and industrial buildings – anywhere that mold removal is required.

Product code:  629489

Product Application

Read all instructions carefully before starting project. Concrobium Mold Stain Remover generates peracetic acid (PAA), an oxidizing agent for mold and other biological staining. Upon mixing, the patented process generates peracetic acid at a level that is safe for users but highly effective for mold stain targeting and removal. Peracetic acid delivers oxidizing and cleaning capabilities

Precautions: For use by professionals only.

Personal protection equipment requirements for applicators: Eye protection and an approved OV/AG/P100 respirator are recommended. See SDS for additional information.

Dual Purpose, Non-toxic Anti-microbial

Concrobium Mold Control offers mold remediation and prevention in a single solution, making it a versatile antimicrobial for restoration pros. The EPA-registered product can be deployed during the “knock down” phases of restoration projects to control mold spore proliferation, and can be applied on restored surfaces for ongoing mold protection.

The odorless, category lV solution contains no harmful chemicals and requires no special handling or personal protective equipment. It contains zero VOCs, making it the ideal solution for restoration contractors with customers who are chemically-sensitive. Now available in a new 14.1 oz aerosol format for smaller jobs.

Removes mold and mildew from indoor areas up to 350 cubic ft.

A Desiccant Product Designed To Protect Surfaces And Possessions Against: Moisture Damage, Musty Odors, And Rust And Corrosion

The Unique Water-Attracting And Storage Technology Is Engineered To Capture And Reduce Moisture In Small, Confined Areas

This Product Is Ideal For Use In Small, Confined Spaces Including: Closets, Bathrooms, Cabinets, Pantries, Storage Bins, Safes, Cars, Trucks

Non-toxic Concrobium Carpet Shampoo deep cleans carpets and upholstery
Antimicrobial technology eliminates and prevents musty odours caused by mold and mildew
Non-foaming solution does not leave a sticky residue
Cleans up to 1500 sq. ft. per 3.78 L
Odourless and fragrance-free
No sticky residue left behind
Leaves carpets and upholstery with a deep, long-lasting clean
Safe for all types of carpets and upholstery
Capacity: 3.78 L

Concrobium Carpet Spot Remover is a revolutionary cleaning solution with degreasing agent that removes the toughest stains and spills with no harmful chemicals. Its high-performance formula removes stains such as food and drink stains, pet stains, grease, pen, marker, crayon, make-up, chewing gum, adhesive and much more.

Removing dry latex paint
Removes tough stains and spills
On pet stains
On pen, crayon & marker stains
Food & wine spills
Chewing gum & adhesive
Rust marks & more

Single solution kills and prevents mold

No bleach, ammonia or VOCs

DIN-registered for fungicide and fungistat

Requires zero isolation time and has no odour

Can be fogged to treat large and inaccessible spaces

Ready to use, no mixing requiredUse to eliminate mold, mildew, and musty odors and prevent regrowth.

EPA-registered formula crushes mold spores as it dries, leaving an invisible barrier.

Odorless solution cleans between 800-1,600 square feet per gallon.

Unique Mold Cleaner contains no bleach or harsh chemicals, safe for use on a wide range of surfaces.

Apply with cool mist, spray, cloth or brush to affected area and allow to dry, no scrubbing or rinsing required.

No special equipment required

No wire-brushing or sanding

Superior mold stain removal efficacy

Easy to use, simply spray on surface

Works on any hard surface

Ingredients break down into safe, biodegradable by-products

Concrobium Mold Control kills, cleans and prevents mold and musty odours

Contains no bleach, ammonia or volatile organic compounds (VOCs)

Fights mould without bleach, ammonia or VOCs

Works as it dries by crushing mold spores at the roots

Leaves behind an invisible antimicrobial shield to prevent future mold growth

Works on drywall, concrete, wood, masonry, siding, shingles, stone, grout, plastic, tile and many more surfaces

Ideal for basements, bathrooms, laundry rooms, attics, closets, garages, windows, car interiors, boat interiors and RVs

Odourless and colourless

Health Canada registered

Effective on hard and fabric surfaces

Size: 946 mL

Single solution kills and prevents mold

No bleach, ammonia or VOCs

DIN-registered for fungicide and fungistat

Requires zero isolation time and has no odour

Can be fogged to treat large and inaccessible spaces

Ready to use, no mixing required