• Kills Adenovirus type 5 and is likely to kill the SARS-COV-2 (the virus that causes COVID-19)
  • Excellent for industrial, institutional, hospital and food establishment
  • Will not harm hard non-porous surfaces, including metal and stainless steel
  • Will not dull floor finish
  • Deodorises surfaces which are prone to odours caused by micro-organism

Safety Data Sheet

Technical Data Sheet

Kosher Certification

LONO: Letter of Non-Objection for food plants

Product Reference Sheet

NOTE: To avoid excess foaming, pour water first or place dilution control system as close to the side of the container being filled. This is a concentrate product: DO NOT USE UNDILUTED.
USE DIRECTIONS: Surfaces must be pre-cleaned before using this product. Prepare a fresh solution for each use.
DISINFECTION:
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 10 minutes.
3) Remove excess liquid.
For HIV-1 (Human Immunodeficiency Virus): Wear disposable latex gloves, gowns, mask or eye covering. Clean blood or body fluids from surfaces before applying EP66 DISINFECTANT AND SANITIZER. Any materials used in the cleaning process that may contain blood or body fluids are to be disposed of immediately in accordance with local regulations for infectious materials disposal.
SANITIZATION (200 ppm):
1) Prepare a 200 ppm active quaternary solution.
2) Apply with a sprayer, cloth, mop or by flooding or immersion. Allow surface or item(s) to remain wet for 1 minute.
3) Remove excess liquid or air dry. NO POTABLE RINSE IS REQUIRED. This product is an effective sanitizer when diluted in water up to 650 ppm hardness (CaCO3).
MILDEWSTAT: Repeat application at weekly intervals or when mildew growth appears.
1) Dilute product.
2) Apply with a sprayer, cloth, mop or by flooding. Make sure to wet all surfaces completely.
3) Let air dry.

DILUTION RATIO (1 PART PRODUCT : X PARTS WATER OR QUANTITY OF PRODUCT / TOTAL QUANTITY OF SOLUTION)
Disinfection and mildewstat1:182
5 ml / 946 ml
22 ml / 4 L
0.2 oz / 32 oz
1.1 oz / US gal
Disinfection (against HIV-1)1:124
7.6 ml / 946 ml
32 ml / 4 L
0.3 oz / 32 oz
1 oz / US gal
Sanitization1:500
1.9 ml / 946 ml
8 ml / 4 L
0.1 oz / 32 oz
0.3 oz / US gal
TECHNICAL SPECIFICATIONS 
AppearanceClear Liquid
ColourColourless to Yellow
Odour Quat
Specific Gravity0.985 – 1.005
pH6.5 – 8.5
Refractive Index11.8 – 14.2%
Quat Generation3rd
Active IngredientsBenzalkonium chloride 5% w/w
 Alkyl dimethyl ethylbenzyl ammonium chloride 5% w/w
DIN02271753
1997278001

12 other products in the same category:

Product added to compare.